Для комбайнов. Торговая площадка Украины

Продукция на продажу: Для комбайнов ,

Дата подачи заявки: 30.05.2016
ID: 82127,
Область: Киевская область,
Район: Киево-Святошинский
Товар: Для комбайнов ,
Количество: 1 шт.
Цена: 1250 usd/шт.

Інструмент Инструмент СТО США 820 одиниць
Новый инструмент 850 едениц.

New Packed in Wood Crate and individual packed

Shipping Flat Rate 165.00 anywhere lower 48 Commercial Address
Pick up is free

71 Pcs Air Tools Kit

Features:
Comes with 1/2” Impact Wrench, 3/8” Ratchet Wrench, Air Hammer and 1/4” Die Grinder
Accessories include;
9 hex bits (1/4”) - Slotted: (2) 3/16”, 1/4”, Phillips: (2) #2, #3, Star (Torx): T-10, T-15 and T-20
8 impact sockets (1/2”)(SAE: 1/2”, 9/16”, 5/8” and 3/4”/ Metric: 11, 12, 13 and 17mm)
5 grinding stones (1/8”), 5 grinding stones (1/4”)
3/4” sanding drum plus 10 sanding drums (3/4”)
Rubber nozzles, High pressure nozzle, Safety nozzle and Tapered nozzle
Sport needles, needle adapter
5 NPT male connectors (1/4”)
Quick connect female coupler
NPT Female connector 1/4”
Adapter (3/8” to 1/2”)
Hex bit adapter (1/4”)
Ball foot air chuck
Air tool oil
4 mm allen wrench
3 chisels
Spring retainer
1/8” collet
2 spanner keys
Teflon Tape
Blow gun

+

13pcs 1/2" Impact Socket Set

Size 1/2" Metric size
Length 3"
Material CR-V
Finish Black Phosphate
Includes 13pcs sockets size:
10mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm and one blow mold case

+

13pcs 1/2" Deep Wall Impact Socket Set

Size: 1/2" Inch size
Length: 78mm
Material: CR-V
Finish: Black Phosphate
Includes 13pcs sockets size:
7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" and one blow mold storage case.

+

10pcs 1/2" Standard Wall Impact Socket Set
Size 1/2" Metric size
Length 38mm
Material CR-V
Finish Black Phosphate
Includes 10pcs sockets size:
11mm 12mm 13mm 14mm 15mm 17mm 19mm 21mm 22mm 24mm and one blow mold case

+

10pcs 1/2" Standard Impact Socket Set
Size: 1/2" Inch size
Length: 38mm
Material: CR-V
Finish: Black Phosphate
Includes 10pcs sockets size:
7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" and one blow mold case

+

2 x 17 Pcs Air Accessory Kit
Pressure Guage, Dual Chuck Inflating Nozzle, Inflating needle, nipples, Blow Gun, Couplings, Quick Release Coupler, 2 Gun Tips

Dual Chuck Inflating Nozzle
Quick Release Coupler
2 Gun Tips
Inflating Needle

+

204 PCS Drill Bit Set

51 Piece fully ground Titanium-Coated HSS drill bits; 42 Piece roll forged black-finished HSS drill bits; 3 Piece black-finished HSS pilot drill bits & hex shank
10 Piece nut driver set, 20 Piece 50mm screwdriver bits Cr. V slotted, Phillips, Posidrive and star, 3 Piece screw finders; Cr. V, 1 Piece drill gauge, 8 Piece wood-boring drill bits, 6 Piece flat wood bits
4 Piece long (300MM) flat wood bits, 4 Piece hole saws, 1 Piece hole saw adapter, 1 Piece counter sink; 11 Piece masonry drill bits, 3 Piece long (300MM) masonry drill bits
27 Piece 25MM screwdriver bits Cr. V slotted, Phillips, Posidrive, star, hex & Robertson, 3 Piece drill stopper, 1 Piece center punch
3 Piece cupped nail sets, 1 Piece bit holder, 1 Piece Allen key

+

1 Pcs 50 Ft Hybrid Polymer Air Hose 3/8" Kink resistant Cold weather

+

148 PCS Screw Driver Bit Set

119PC 25mm Screwdriver Bit
Slotted: 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
Phillips: #00, #0, #1, #2*3PC, #3, #4
Pozi: #00, #0, #1, #2*3PC, #3, #4
Square: #0, #1, #2, #3
Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45
Torx(Tamper-proof): T5H, T6H, T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H, T45H
Hex: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8mm
Hex: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
Hex(Tamper-proof): 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm
Hex(Tamper-proof): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
Clutch: C1, C2, C3
Multi-spline: M5, M6, M8
Torque: 6, 8, 10
Twi-wing: 1, 2, 3, 4
Spanner: 4, 6, 8, 10
Tamper 5STAR: TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, TX50
1PC 25mm Adaptor
13PC 50mm Screwdriver Bit
Phillips: #1, #2, #3
Pozi: #2, #3
Torx: T10, T15, T20, T25, T27, T30, T40
Square: #2
13PC 75mm Screwdriver Bit
Phillips: #1, #2, #2, #2, #3
Slotted: 1/4"
Hex: 3/16", 1/4"
Square: #1, #2, #2, #2, #3
1PC 60mm Magnetic Bit Holder
1PC Quick Release Bit Holde

+

24 Pcs Combination



Телефон:
email:
Контактное лицо: Руслан АСП ТРЕЙДІНГ